X-SPR Pro CHEEK PAD 35mm

Configure the ideal fitting of your helmet.

The SHOEI X-SPR Pro's highly customisable inner padding ensures the helmet stays firmly on your head, on every straight, in every curve of the race track.

With our cheek pads you can replace the original padding of your helmet. Or use a slightly thicker or thinner pad for a custom fit. The cheek pads of the X-SPR Pro are exchangeable in all available sizes, as shown in the chart below.

The size of the original pad can be found on its back.

The ergonomic pre-forming of the large-area pads reduces the helmet's tendency to lift and ensures maximum stability even at top speed. A multi-layer construction of the padding core made of three-dimensionally shaped foam layers with graduated firmness ensures a tight fit and pleasant, soft skin contact. Ventilation channels on the inside enable rapid cooling and drying of the cheek pad. The mesh material in the cover of the pad promotes rapid evaporation of moisture.

If the inner padding of your helmet is worn, sweaty, or can no longer be cleaned after many laps on the track, replacing it will restore the original fit and quickly provide you with a fresh, hygienic helmet interior.

Set of 2 pads (left/right).

Suitable for the SHOEI X-SPR Pro model.

Fastening by means of press studs and fastening strip.

Instructions for fitting and cleaning can be found in the helmet manual.